I am the original owner of this excellent cartridge, it has ~270 hours on it. How do I know that? I use a software timer for all my cartridges, so not a guesstimate. It was always used on my transfi terminator tonearm, which allows for a very wide range of setup parameters, it always ran @ 1.6 VTF. My records are always cleaned using an RCM, so this cartridge should have very little wear.Have all original packaging. I'm selling because I have too many cartridges and need to thin the herd a bit. Output voltage at 1000 Hz, 5cm/sec. - 5 mV
Channel balance at 1 kHz - 1 dB
Channel separation at 1 kHz - 26 dB
Channel separation at 15 kHz - 15 dB
Frequency range at - 3dB - 20-31.000 Hz
Frequency response - 20-20.000 + 2 / - 0 dB
Tracking ability at 315Hz at recommended tracking force - 80 µm
Compliance, dynamic, lateral - 22 µm/mN
Stylus type - Nude Shibata
Stylus tip radius - r/R 6/50 µm
Tracking force range - 1,4-1,7g (14-17 mN)
Tracking force, recommended - 1,5 g (15 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1,2 kOhm
Internal inductance - 630 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 150-300 pF
Cartridge colour, body/stylus - Black/Black
Cartridge weight - 7,2 g
Replacement stylus unit - 2M Black (interchangeable with 2M Bronze)
$500 shipped with insurance to lower 48, others please ask just so I can check extra shipping costs, if any.
|
