Bogen RPF-60 Stereo Power Amplifier Section That has been Re-Built onto a New Chassis.The original RPF-60 was to far gone (rusted) to refurbish but the transformers and 7355 output tubes are all good. It was decided to build only the power amplifier section on a new chassis. Please Note: The chassis has been re-purposed from another project and it is somewhat larger than would be actually required. Also, there are some additional unused holes but the overall appearance is very good. The original Bogen specification is for an IHFM "music" power rating of 30 Watts/ channel(both driven)The original RMS power rating was more like 15 Watts/channel. Improved filtering and less load on the power transformer results in a 20 Watts/channel RMS power rating for this re-build.
Other original Bogen specs. are: Frequency Response of 20Hz - 20kHz with a distortion figure of .6% at full output. Input sensitivity for the power amp. section is 1.5 VRMS for rated 20 watt RMS power. Output transformer taps for 4, 8 or 16 Ohm speaker loads. Comes with Manual, Spare Fuse and IEC Power Cord. Net Wt: 19 Lbs. Dim: 17" W x 10" D x 7 3/4" H Power Requirement: 110-125 V 60 Hz. (USA and Canada Only) Constructed in the USA with Quality Components.
|